1. Working principle of PVC plastic diaphragm valve: The plastic diaphragm valve uses a corrosion-resistant lining valve body and a corrosion-resistant diaphragm instead of the valve core assembly, and the movement of the diaphragm is used for adjust...
The definition of "valve" is a device used to control the direction, pressure, and flow of fluid in a fluid system. A valve is a device that allows the medium (liquid, gas, powder) in the piping and equipment to flow or stop, and can control its flow...
Pneumatic butterfly valve is usually a combination of pneumatic actuator, valve body and some accessories connected after installation and debugging. This article mainly introduces the matters needing attention in the field use of pneumatic butterfly...
The statement ‘preference for PVC pipes’ really depends on the application. Iron pipes and PVC pipes have vastly different properties that allow them to be used in different situations. In the water industry (and household plumbing etc.) it is prefer...
You can only thread PVC if it is schedule 80 or 120. Any other schedule will be too thin walled to hold a good connection. The one time I needed a piece threaded I used a hand threader for it like the following. Manual Ratchet Threaders You just need...
Kasta High-Density Polyethylene pipes exhibit better strength when compared to PVC. Kasta HDPE pipes are manufactured in greater lengths and diameters. Coiled lengths of Kasta HDPE pipes are available up to 1000 feet for certain sizes making it ideal...
PVC: PVC, or polyvinyl chloride, is a type of plastic used in numerous industries. It is durable, inexpensive and resistant to heat, water and chemicals. Additives such as lubricants, heat stabilizers, plasticizers, impact modifiers, fillers, biocide...
Some of the major advantages of UPVC Pipes are: 1. UPVC pipes and fittings are cost-effective and easy to install. 2. They can bear temperature up to 60 degrees Celsius and hence can be used for cold water applications. 3. One of the major advantages...
